IMPREGNATE FOR REMOVAL OF ASBESTOS
IMPREGNATE is based on water dispersion of acrylic resin which can penetrate inwards a surface. After the impregnate is fully dry, the surface is hardened which prevents further falling off, e.g. asbestos fibres.
Scope of aplication
IMPREGNATE FOR REMOVAL OF ASBESTOS is designed for protecting against dusting during removal of asbestos, acekol type panels and plasterboards, as well as protecting against asbestos fibres during removal of asbestos -content products. Can be also applied to removal of dust in order to avoid dusting.
The impregnate is designed for interior and outdoor painting.
- thanks to high penetration capabilities the product penetrates inside it bonding and strengthening the surface
- prevents dusting during removal of asbestos
- the impregnate does not change vapour-permeability of surfaces, onto which is applied
IMPREGNATE FOR REMOVAL OF ASBESTOS is awarded with the positive opinion of the Building Research Institute on efficient capabilities in protecting the environment against asbestos dust deriving from asbestos-cement boards which are generated during their removal.
Protecting the asbestos during removal:
Surfaces designed for removal shall be painted with a paint brush or spray with the use of IMPREGNATE FOR REMOVAL OF ASBESTOS.
Tools to be cleaned with water.
The impregnate should be thoroughly mixed before use.
Usually apply one coat (depending on absorption characteristics of the surface).
High pressure application is best in case of application of the impregnate of vast areas. The impregnate can also be applied with a roller or a paint brush.
Impregnating shall be performed at the temperature of 50C – 350C.
Impregnated coats shall be protected against rain for the period of at least 8 hours.
Note: Cleaning and painting of asbestos can be performed only by professional companies due to asbestos dusting and the need to conduct professional preparation of the asbestos surface prior to painting.