ANTI-GRAFFITI is a product for surface protection against graffiti which is based on modified polymers. ANTI-GRAFFITI can penetrate into the surface. It protects the material against graffiti made with spray paints (oil, acrylic, etc.), water-resistant markers, ink, polluted air, acid rain and moisture. It does not withhold diffusion process simultaneously creating hydrophobing coat. It is transparent.
ANTI-GRAFFITI creates a protective surface, so-called cleanable – the coat of ANTI-GRAFFITI is also removed during cleaning the graffiti. The cleaned place should be again coated with the ANTI-GRAFFITI.
Scope of aplication
ANTI-GRAFFITI is designed for different types of surface; smooth and rough, e.g. all types of stones, marble, tiles, ceramics, concrete, mineral and acrylic plasters, lime-cement plasters, mineral paint coated surfaces.
- provides resistance against graffiti
- provides hydrophobing to the protected surface
- protects the surface against damp, rain and snow
- improves lifespan of the protected surfaces
- improves frost resistance characteristics
- protects against dirt
ANTI-GRAFFITI impregnate to be applied onto the clean and dry surface. The surface to be cleaned with water pressure tools with detergent. Remove algae and moulds with the use of special purpose agents.
In order to obtain the best hydrophobing effect we recommend the humidity of the surface not to exceed 4%. The temperature of the surface to be painted should be in the range of 100C – 300C
Apply two or three coats – “wet to wet”. Each subsequent coat to be applied prior the previous is dry i.e. not later than 15-20 minutes from the application of the previous coat. If needed, the product can be thinned with water (low-absorptive surfaces, e.g. marble, granite 10-15%, and highly absorptive surfaces, e.g. cement, terracotta 20-30%).
High pressure application is the best in case of application of the ANTI-GRAFFITI of vast areas. The impregnate can also be applied with a roller or a paint brush.
The product shall be evenly applied on the surface.
Removing the graffiti:
The secured surface after covered with graffiti can be cleaned with the use of a standard high pressure cleaner with hot water and detergent.
ANTI-GRAFFITI creates a protective surface, so-called cleanable – the coat of ANTI-GRAFFITI is also removed during cleaning the graffiti. The cleaned placed should be again coated with the ANTI-GRAFFITI according to the manual.
Use water for cleaning painting equipment.
Impregnating shall be performed at the temperature of 50C – 350C.
Impregnated coats shall be protected against rain for the period of at least 8 hours.