AKSILUX all purpose impregnate
AKSILUX is an acrylic, protective-improving water-soluble impregnate which can penetrate inside the surface designed for further painting or finish with decor materials.
Scope of aplication
AKSILUX can be applied to all places where preparation and improvement of the surface is required prior to painting with a paint or finish materials, eg. tiles, panels, rugs, wallpapers, etc. Can be applied for concrete surfaces, e.g. concrete roof tiles, asbestos surfaces, fibre-concrete, mineral or acrylic plasters, plaster boards, walls before and after patching plasterwork, chipboards.
The impregnate is designed for interior and outdoor painting.
Examples of use:
|surface to be finished||function of the AXILUX impregnate||paint type or finish method|
|concrete roof tiles||improves adherence of paint, improves the surface and efficiency of paints||AKSILBET DACHÓWKA (ROOF TILE) – paint for roof tiles and asbestos|
|asbestos/acekol type panels, concrete-fibreboards||improves adherence of paint, improves the surface and efficiency of paints||AKSILBET DACHÓWKA (ROOF TILE) – paint for roof tiles and asbestos|
|concrete fences, concrete haberdashery, e.g. wall panels||improves adherence of paint, improves the surface and efficiency of paints||AKSILBET paint for concrete|
|facades, mineral plasters, acrylic plasters||improves adherence of paint, improves the surface and efficiency of paints||SIL-FAS facades paint|
|surfaces under the glue for thermal insulation systems||binds loose surfaces, prevents dusting, reduces absorption of the surfaces and makes it homogenous all over the surface||glue for the insulation system, surfaces under acrylic and mineral plasters|
|interior walls, ceilings, plasterboards, patching plasterwork surfaces||binds loose surfaces, prevents dusting, reduces absorption of the surfaces and makes it homogenous all over the surface||emulsion paints, patches, mineral plasters, tiles, wallpapers|
|concrete flooring, surfaces for self-leveling screed||binds loose surfaces, prevents dusting, strengthens the surface||paints for concrete flooring, tiles, panels, and carpeting|
|chipboards||improves adherence of paint, improves the surface and efficiency of paints||mineral plasters, patches|
AXILUX all purpose impregnate:
– thanks to high penetration capabilities, the products migrates inside it binding and strengthening the surface – even very loose surfaces such as falling off facades, chalk paints, etc.
– filling of surface pores with the use of acrylic resin which makes the absorption homogenous all over the surface and reduces paint consumption improving their adherence to impregnated surfaces
– in case of concrete roof tiles and asbestos it is a must for renovation system of those surfaces by improving adherence of the paint to the surface
– the impregnate does not change vapour-permeability of surfaces, onto which is applied
Impregnate to be applied onto the clean, dust-free and dry surface. The surface to be cleaned with water pressure tools with detergent. Remove algae and moulds with the use of special purpose agents.
The temperature of the surface to be impregnated should be in the range of 80C – 300C
The impregnate should be thoroughly mixed before use.
Usually apply one coat (depending on absorption characteristics of the surface).
Surfaces which tend to cracking shall be secured at least twice.
Each subsequent coat to be applied after the previous coat is dried i.e. after 2 hours from the application of the previous coat.
High pressure application is best in case of application of the impregnate of vast areas. The impregnate can also be applied with a roller or a paint brush or by rubbing in.
The impregnate can be thinned with water.
Use water for cleaning painting equipment.
Impregnating shall be performed at the temperature of 50C – 350C.
Impregnated coats shall be protected against rain for the period of at least 8 hours.
Note: Cleaning and painting of asbestos can be performed only by professional companies due to asbestos dusting and the need to conduct professional preparation of the asbestos surface prior to painting.
Painting, wallpapers, tile gluing, etc. shall be started after the impregnate is dry. Preferably not sooner than after 2 hours of drying at the temperature of 20 ± 2°C and relative humidity of air 65 ± 5 %.